02 Services
From the design desk to the box
Five services, one team. Take all of them together, or just the one you need.
01 Phase: Design
Product design & 3D modeling
From a sketch — or just a description — to a print-ready 3D model.
What does it do, where does it live, how is it held? We start there. Then we build the model around real dimensions, tolerances, how the parts go together and how it will actually be made. We review it on screen together, so anything you don’t like changes before a single print.
What you get
- Sketches and dimensions
- Print-ready 3D model (STL / 3MF)
- Editable CAD file (STEP)
- Simple technical drawing
What we need from you
- → A one-line idea is enough
- → A napkin sketch or a photo
- → Reference products you like
- → Dimensions or existing parts, if any
Good for: Anyone without a 3D model yet. If you already have one, we check it for manufacturability (DFM).
Tell us about your project02 Phase: Prototype · Launch
3D printing: prototypes & small batches
One-offs to test form and function; small batches for your first sales.
First a quick, cheap form study. Then a functional test in the real material. Finally, a repeatable small batch on the same settings. We choose layer height, infill and print orientation for what the part has to do — strong where it needs strength, clean where people will look.
What you get
- Form prototype (to hold and judge)
- Functional prototype (to test)
- Presentation sample
- Small batch
What we need from you
- → Your 3D model, or the one we design
- → Conditions of use: heat, sun, impact, flex
- → Color and finish
Good for: Enclosures, mounts, clips, jigs, models, spare parts, accessories.
Tell us about your project03 Phase: Prototype · Launch
Laser engraving & cutting
Logos and markings on products, wood and acrylic parts, inserts, templates.
A laser does two jobs: it engraves and it cuts. We engrave logos, serial numbers, scales and instructions onto products, boxes and tags. We cut parts, box inserts and assembly or drilling templates from sheet material. No vector file? We’ll make your logo laser-ready.
What you get
- Logo & brand engraving
- Serial numbers, marks, scales
- Cut parts and inserts
- Assembly / drilling templates
What we need from you
- → Your logo (vector is ideal, PNG works)
- → The product or material to engrave
- → Position and size
Good for: Branded products, gift sets, stands, organizers, leather tags, wooden boxes.
Tell us about your project04 Phase: Launch
Packaging: box & insert prototypes
A box dieline, an insert that fits your product exactly, and a logo on the lid.
A product isn’t finished until it’s in a box. We draw the dieline, set up cut and fold lines, and design an insert sized to hold your product in place. For the first prototype and small batch we cut the box and insert in the workshop and engrave the lid. If you need packaging printed in volume, we run it through a partner.
What you get
- Dieline file
- Box prototype
- Custom insert
- Engraving on packaging
What we need from you
- → The product itself or its 3D model
- → What else goes in the box (cable, card, accessory)
- → How the unboxing should feel
Good for: Investor pitches, crowdfunding videos, gift sets, first sales.
Tell us about your project05 Phase: Design · Launch
Product graphics & launch visuals
Logo placement on the product, labels, and visuals for your first pitch.
Where the logo sits and how big it is, what the label says, what goes on the box — that’s design too. We also prepare clean product visuals for your first investor deck or crowdfunding page.
What you get
- Logo placement on the product
- Label and packaging graphics
- Pitch / campaign visuals
What we need from you
- → Your logo and brand colors, if any
- → Information the label must carry
- → Where the visuals will be used
Good for: New brands, startups preparing a first pitch, products heading to crowdfunding.
Tell us about your projectGot an idea? Let’s start there.